Off Road Air Compressor
Off Road Air Compressor – JX-60AS means that this Air Compressor is well-suitable for tough off-road sectors where original and stable operations are required. It has a power rating of 45 kW (60 HP) and as a result has a constant output, ideal for use at construction sites, mining, and other offsite industrial activities.
- Pressure(MPa): 0.7~1.3
- Exhaust Volume(m³/min): 7.3~6.2
- Power(KW/HP): 45/60
- Dimension(mm): 1500*1000*1350
- Noise dB(A): ≤78±2
- Weigt(kg): 700
- Pipe Diameter: G1 1/2
- Startup Mode: Direct Start
- Power Supply: 380V/50HZ, available for customization(110V~480V,50HZ/60HZ)
-
Energy-efficient
-
Stable operation
-
Low noise
-
Intelligent
Get a quote now
The JX-60AS offers an exhaust pressure of 0.8 MPa and an exhaust amount of 7.2 m³/min. This comes with a single-stage compression system and is air-cooled to ensure that it works to the optimum in some of the worst weather conditions with temperatures as high as 46 °C. This unit is built to be more durable and measures up to 700kgs with a Compact size of 1500mmx1000mmx1350mm ideal for off-road use.
- Rugged Off-Road Design: Manufactured to specifically cater to harsh outdoor environments and perfect for use in offroad areas or remote regions.
- Powerful Performance: With the operating pressure of 0.8 MPa, the capacity of the compressor is 7.2m³/min to provide a continuous supply of compressed air for power tools and other equipment.
- Air-Cooled System: Avoids the risk of burns when used in hot environments to enable constant use without the risk of consumer burn.
- Quiet Operation: Reports a sound intensity of no more than 78 dB, thus suitable for quiet applications outside construction sites.
- Durable Drive Mode: So equipped with a direct connection drive the wiring is done in a way that there is no loss of power and reliability is increased.
- Single-Stage Compression Unit: Delivers high compression ratio; it guarantees long-term service in conditions of high pressure.
- Air-Cooled System: Its environmental operational temperature is designed to allow continuous operations without overheating or getting too hot.
- Lubrication System: It consumes 18 liters of lubricant 46# grade for it to operate smoothly while at the same time reducing wear and tear of the moving parts.
- Maintenance: Lubrication should be also checked and the equipment should be frequently cooled to operate effectively.
- Installation: Ensure that the compressor is installed in a ventilated environment as a way of ensuring that the unit does not overheat and thus affect its performance.
- Operation: To reduce pressure on the compressor ensure that you stick to the pressure settings that are recommended for your particular applications.
- Construction Sites: Used for operating pneumatic tools and appliances in off-road and rough terrain construction sites.
- Mining Operations: Able to effectively transport power for enormous loads and convey secure air in extensive mining scenarios.
- Remote Industrial Projects: Ideally suited for industries where they need very stable compressed air at a location that cannot be easily connected with utility services.
- Agriculture: May be suitable for big agricultural companies that deal with large compressor needs for irrigation or farming machinery.
Item | Technical Parameter | |
Unit Model | JX-60AS | |
Exhaust Pressure (MPa) | 0.8 | |
Exhaust Volume (m3/min) | 7.2 | |
Cooling Mode | Air-cooled | |
Maximum Environmental Temperature | 46℃ | |
Number of Compression Stages | Single-stage | |
Exhaust Oil Content | ≤3 ppm | |
Operating Noise dB(a) ±2 | ≤78 | |
Outlet Pipe Diameter | G1 1/2 | |
Drive mode | Direct Connection | |
Amount of Lubricant (L) | 18 | |
Lubricant Grade | 46# | |
Inspiratory State | Ordinary Temperature | Ordinary Temperature |
Pressure (MPa) | 0.1013 | |
Relative Humidity | 95% No Dew | |
Motor | Rated Power (HP/KW) | 60/45 |
Voltage (V)/ Frequency (Hz) | 380/50, can be customized | |
Speed (RPM) | 2940 | |
Startup Mode | Y-Δ Start | |
Protection Grade | IP23, can be customized | |
Insulation Grade | F | |
Usage Factor | 1.2 | |
Overall Dimension L×W×H (mm) | 1500×1000×1350 | |
Unit Weight (Kg) | 700 |
Media error: Format(s) not supported or source(s) not found
Download File: https://www.vibmac.com/wp-content/uploads/2024/09/fixed_speed_air_compressor_JX_10AS_video.mp4?_=1-
Pressure(MPa): 0.7~1.3
-
Exhaust Volume(m³/min): 12.4~9.1
-
Power(KW/HP): 75/100
-
Dimension(mm): 1700*1210*1550
-
Noise dB(A): ≤80±2
-
Weigt(kg): 1200
-
Pipe Diameter: G2 1/2
-
Startup Mode: Direct Start
-
Power Supply: 380V/50HZ, available for customization(110V~480V,50HZ/60HZ)
VIEW MORE
-
Pressure(MPa): 0.7~1.3
-
Exhaust Volume(m³/min): 4.7~3.1
-
Power(KW/HP): 30/40
-
Dimension(mm): 1350*850*1110
-
Noise dB(A): ≤72±2
-
Weigt(kg): 460
-
Pipe Diameter: G1
-
Startup Mode: Direct Start
-
Power Supply: 380V/50HZ, available for customization(110V~480V,50HZ/60HZ)
VIEW MORE
-
Pressure(MPa): 0.7~1.3
-
Exhaust Volume(m³/min): 6.4~4.7
-
Power(KW/HP): 37/50
-
Dimension(mm): 1500*1000*1350
-
Noise dB(A): ≤78±2
-
Weigt(kg): 650
-
Pipe Diameter: G1 1/2
-
Startup Mode: Direct Start
-
Power Supply: 380V/50HZ, available for customization(110V~480V,50HZ/60HZ)
VIEW MORE
-
Pressure(MPa): 0.7~1.3
-
Exhaust Volume(m³/min): 9.4~6.1
-
Power(KW/HP): 55/75
-
Dimension(mm): 1700*1210*1550
-
Noise dB(A): ≤80±2
-
Weigt(kg): 1100
-
Pipe Diameter: G2 1/2
-
Startup Mode: Direct Start
-
Power Supply: 380V/50HZ, available for customization(110V~480V,50HZ/60HZ)
VIEW MORE
-
Pressure(MPa): 0.8
-
Exhaust Volume(m³/min): 2.3
-
Power(KW/HP): 15/20
VIEW MORE
-
Pressure(MPa): 1.6
-
Exhaust Volume(m³/min): 0.5
-
Power(KW/HP): 7.5/10
VIEW MORE
-
Pressure(MPa): 0.8
-
Exhaust Volume(m³/min): 12.3
-
Power(KW/HP): 75/100
VIEW MORE
-
Pressure(MPa): 0.8~1.3
-
Exhaust Volume(m³/min): 12.2~9.1
-
Power(KW/HP): 75/100
VIEW MORE