Air Gas Compressor​ (WEG Motor)

The JX-250AS-WEG has an operating pressure of between 0.8 to 1.3 MPa (116 to 188 psi) and an FAD that should not exceed 30 m³/min (1059.3 CFM). This powerful compressor is rated at 185 kW (250 hp) as mentioned above in case of high airflow requirements. Although the length, breadth, and height of this design are 3550 mm, 3550mm, and 2300mm respectively and its working weight is 4800 kgs; the design is heavy and robust enough to endure tough industrial use but it is not bulky.

• High Airflow Capacity: New models boast a maximum airflow, out of 30 m³/min (1059.3 CFM), these should work well in construction or manufacturing firms.
• Adjustable Pressure Settings: Having three ranges of pressure: standard – 0.8 MPa (116 psi); maximum – 1.0 MPa (145 psi); and high – 1.3 MPa (188 psi) which allows selecting the pressure range required for the job.
• Powerful Performance: Discover this highly rated compressor which can deliver an airborne power of 185 kW (250horse horsepower) for persistently delivering air anxiety in the Kuwait setting.
• Noise Control: Intentionally low noise The sound loudness is between 84 db ±2 and can be used in areas that allow very low noise levels.
• Durable and Robust Construction: Robust in design the compressor uses the best material that is resistant to use and all weather conditions.
• Efficient Air Delivery: It has a DN125 Amal identification for an organization outlet pipe diameter to cater for operations at various conditions.

• WEG Motor: The high-performance motor is responsible for powerfully driving the uniquely constructed compressor, which operates efficiently as a motor without claiming much energy power.
• Compressor Unit: This is the most crucial component of the system and is designed especially for highly efficient compression of the gaseous phase.
• Cooling System: Designed for proper working temperature to prevent it from developing some technical hitches as a result of heat produced while in use of the gadget.
• Lubrication System: Provides a consistent means of greasing hence reducing the amount of fret on the compressor and in the process enhancing its total lifespan.

• Regular Maintenance: Therefore an amplifier must be ordinarily checked as well as specific components should be made to undergo regular checks; mechanical items in specific require such attention.
• Ventilation: As for the recommended areas for using the compressor it was suggested that the compressor should be worked in places with fresh air in order to prevent the building up of the gases when operating the compressor.
• Fuel Management: That means that fuel has to be treated in the correct way and stored in the correct way so it can perform optimally and is not contaminated.