Air Compressor 30 Gal​

The performance characteristics of the JX?75AS?55KW are described by an exhaust pressure of 0.8 MPa (116 psi) and its capability to deliver significant parameters of rendered compressed air to consumers. The compressor type is a single stage, designed for efficient and dependable operation, and air-cooled to control the temperature with the constant load even on a long-term basis. The JX-75AS-55KW thus carries the characteristics of a heavy-duty generator with a noise level of ≤ 80dB (a)± 2 which makes it suitable for places where sound is a very important factor.

• Exhaust Pressure and Volume: Due to the 0.8 MPa (116 Psi) exhaust pressure and 9.3 m³/min exhaust volume, the compressor is ideal for high-usage pressure applications as used in industries.
• Air-Cooled Design: This air-cooled system guarantees heat and cool air circulation to work smoothly all the time, especially in hot environments, maximum allowed environmental temp: of 46°C.
• High Efficiency Motor: The compressor is driven by a 55 kW (75 HP) electric motor driving at 2940 RPM offering customers uninterrupted and consistent performance for commercial and industrial uses.
• Low Oil Content: Exhaust oil content is ≤3 Ppm so the air produced is not contaminated and can thus be used in sensitive processes.
• Startup Mode: The Y-Δ start method enables a power-up that minimizes voltage and current surges thus cutting the life expectancy of the motor and the compressor.
• Lubrication System: The unit uses 31 liters of 46# grade lubricant for it to run efficiently and reduce internal tears on the components of the compressor thus increasing its life.

• Compression Components: Single-stage compression helps to achieve high efficiency and low maintenance while delivering a high-performance air output.
• Motor: This high-efficiency 55 kW motor is the best power supply for continuous and rigorous usage.
• Lubrication System: In addition, proper maintenance of the lubrication system also reduces the chances of internal wearing as well as damage.
• Cooling System: The air-cooled system needs maintenance, to cool it down effectively and avoid cases of overheating the machines.

• Installation: Ensure the right environment for cooling of the tool and this will require installation of the compressor in a well-ventilated area. Sufficient space should be provided for easy access to maintenance and no direct contact with sunlight or humidity.
• Maintenance: Daily or weekly inspect the lubricant levels and replenish the lubricant as may be needed for effective lubrication and longer lasting of the unit. Check and ensure the cooling and filtration systems are in good health through routine check-ups.
• Pressure and Load Management: Make sure the compressor is not being loaded up or over-pressured in any way as this will damage the system. This varies from one task to another and therefore one should ensure that he or she uses the right amount of pressure depending on the job that is being done.
• Noise Management: For compressors, the noise level should be ≤ 80 dB(a) ± 2 but for places with noise sensitivity, normal precautions should be taken.

• Industrial Manufacturing: Suitable in industries where reliable and efficient compressed air is for the operation of machinery, tools, or pneumatic system in production facilities.
• Automotive Industry: Ideal for automotive workshops or garages that require a consistent source of compressed air in their tools, equipment, or air-braced tires.
• Construction Sites: Supply pressurized air needed in pneumatic tools, drilling equipment as well as other construction equipment.
• Food and Beverage Processing: The high purity and low-pressure drop of the compressed air make it suitable for use where high-quality air is critical without induced oil contaminants.
• Textile Industry: It supplies premium quality and free, high-pressure aeration for various textile machineries and production systems.
• Pharmaceutical Industry: Ideal for applications where clean flowing, oil–free compressed air is essential for critical manufacturing operations.