General Air Tank Mounted Air Compressor (Two Tanks)

The Z-SG10APM model works at 0.8 MPa (116 psi) along with FAD – 1.1 m³/ min industrial air screw which is efficient for medium-duty work. Laying at 230 liters, the air receiver tank helps to store and regulate the compressed air with minimal cycling of the compressor in use. It further provides a quieter working environment with noise produced ≤62 dB even in noisy industrial facilities.

• Large 230-Liter Air Receiver: The enclosed air tank is rather large and can accommodate a large volume of compressed air, this means that, during operations, compressed air supply is not interrupted since the equipment does not need to be started and stopped frequently.
• High-Efficiency Motor: This model is driven by a 10 HP (7.5 kW) motor; it will provide the necessary air pressure for different industries and commercial usages at maximum capacity.
• Low Noise Operation: This specific compressor has a noise level of ≤ 62 dB and thus can be ideal for indoor or where noise is reduced due to its low noise level.
• Compact and Durable Design: However, with its powerful performance, the Z-SG10APM occupies a relatively small space with its dimensions 1250mm(W) x 600mm(D) x 1380mm(H), and so would not require large space to set up the device.
• Direct Drive Screw Technology: The direct drive system enables smooth transfer of power from the motor to the compressor unit with minimal power loss and the life of the compressor is also enhanced.

• 230-Liter Air Receiver: The large tank is meant for holding compressed air and this smoothes on the pressure regularly supplied to the motor; on the motor, there isn’t much pressure build-up.
• Direct Drive Motor (7.5 kW / 10 HP): A high output motor that guarantees constant smooth and effective operation for longer durations with varying loads.
• Screw Compression System: Provides reliable air compression; reduces wear and helps to achieve long service life.

• Installation: There should be enough space around the air receiver and other parts of the compressor for adequate cooling to make sure that there is enough ventilation around the compressor.
• Routine Maintenance: Often noise levels, temperature, oil filters and pressure, air filters, and oil filters should be monitored and adjusted. It is important to keep all the respective parts clean or replace them when worn out to achieve optimized performance.
• Noise Considerations: Although the compressor makes very little noiseMounted in an environment where noise is likely to be disruptive, especially in a confined environment.

• Industrial Workshops: Ideal for use in applications such as the operation of pneumatic tools, air-operated spray systems, and any other air-driven equipment in industries where a consistent supply of high-pressure air is necessary.
• Manufacturing Plants: Designed to serve power units, conveyors, tools, and other pneumatic-related operations in mid-sized production facilities.
• Automotive Services: Ideal for any automotive workshop that requires a constant and reliable supply of air for such uses as inflating tires or for powering equipment such as pneumatic tools and air-operated devices.
• Construction Sites: Ensures stable air supply for use in running air-operated tools and other equipment in construction circumstances.