Two-Stage Screw Air Compressor​

JX-100APML2 Two-Stage Screw Air Compressor is C rarity because of the Maximum running pressure of 1.6 MPa provides a steady and power full source of pressurize air. In more detail, this particular compressor features the flow rate of 9.0 m³/min and that makes this compressor perfect for different pneumatic systems. The size of this compressor is 2100mm x 1440mm x 1650mm and weighs 1300kg; the pipe connection is G1/2 so as to convey air to the tools and machines efficiently.

• High Operating Pressure: delivering up to maximum 1.6 MPa pressure, scaled for severe applications.
• Efficient Flow Rate: Yields 9.0 m³/min (317.8 CFM) suitable for various industries; different industries.
• Powerful Motor: Together with 75 kW (100 HP) motor for the constant and effective operation of the plant.
• Sturdy Construction: Described at its bare minimum as durable and effective for some of the less forgiving climates which form the industrial landscape.
• Compact Design: This in turn favours its placement anywhere hence the efficient footprint.

• Screw Compressor Mechanism: Two stage multi screw design is employed, which enhances efficiency and provides high pressure at the same time.
• Air Receiver Tank: Used as receiver of compressed air to reduce pressure fluctuations.
• Filters: To maintain the admitted air clean so that Casey/corrosive substances cannot come closer to the inside parts of the compressor.
• Belts and Hoses: This is because maintenance is one means towards the improvement of utilization of facilities and equipment and avoiding frequent replacements.
• Pressure Control System: also has an auto pressure control for the output that ranges from a constant pressure throughout its use in a particular application.

• Ensure Proper Ventilation: It is also important to see that there is a good flow of air round the compressor so that it does not over heat especially when in use.
• Regular Maintenance Checks: For the best results of the car, filters, belts and hoses should be checked as well as replaced sometime later.
• Verify Power Supply: Refer to electrical requirements to equate the loads to the compressor; otherwise, the compressor will be shorted.
• Monitor for Air Leaks: Some of them recommended that one should often check on the system so that they can be in a position to see that there is a leakage and which will not be wasting energy.

• Industrial Facilities: Ideal for weight and balance operations to support aerial standard air tools in manufacturing sectors.
• Construction Projects: This was providing a constant quality of compressed air to several tools and equipmentused in the construction industry.
• Automotive Services: Especially recommended for shops which require a constant supply of airflow when using some of the equipment.
• Textile and Packaging Industries: Some of them are used extensively in the textile processes and most of the packaging processes.
• General Manufacturing: Especially suitable for a range of manufacturing industries for supply of compressed air requirements.