Portable Rotary Screw Air Compressor

B-XG15AL provides a 330L air receiver with a 4-in-1, power-type working pressure of 0.8-1.0 MPA. While some only range from a flow rate of 1.3- 1.5 m³/min and are powered by a means of 11 kW (15 HP) motor. This vessel measures 15507001600mm and has a weight of 510 Kg, This uses G 3/4 pipe diameter in connection to air systems.

• 4-in-1 Functionality: Facilitates several operations on a host air compressor machine as a compressor, stored chamber, filter, and moisture eliminator.
• High-Efficiency Motor: The constant running without intermission at matched full load to produce the required air compression for a standard 15 HP motor.
• Flexible Pressure Range: It operates at a pressure of 0.8 – 1.0 MPa and as such is flexible for use in various applications.
• Large Air Receiver: This is an option of a 330L tank which translates to minimal cycling with a tank that will utilize this factor.
• Rotary Screw Technology: Since it operates dependably and continuously without requiring extensive maintenance, collateral staffing is characterized as highly reliable.
• Portable and Compact: Because VN has been designed to be portable it has been well equipped to be located at different points and in different stations whether permanently or on a temporary basis during one project or another.

• Rotary Screw Motor: Enables a longer cycle of air operation of compression in a more quiet mode.
• 330L Air Receiver: Met the necessary air pressure and constant air pressure flow throughout its operations.
• Air Filters and Belts: Regular checkups so that the airways that it supplies are clean while at the same time ensuring that the equipment is working at its best.
• Seals and Gaskets: Quality was high accompanied by high performance that operated without any noticeable air leakage.
• Pressure Valves: The following is important in overseeing pressures of air and handling them.

• Ensure Proper Ventilation: The surroundings of the unit should be adequately ventilated to help negate the development of heat within the unit.
• Regular Maintenance: With this, there will always be the right working condition of the compressor equipment by regular examination of the filter, belts, and seals.
• Voltage Compatibility: Make sure not to break or connect the power supply with the compressor to make sure it works with the compressor.
• Monitor for Air Leaks: Ask about the Sycliew pressure to know if the pipes leak so that the pressure will always be good.
• Store Safely: This means the compressor has to be placed in a region where it cannot be interfered with by conditions that may lead to its deterioration or make the part get worn out when it is not in use.

• Construction Sites: Used for constant supply of compressed air mainly for commodities such as pneumatic tools and other kinds of air-powered equipment.
• Workshops: A very good product for charging pneumatic tools common in automobile or carpentry businesses.
• Industrial Operations: Reductions maintain similar ratios of air delivery to parts production and Industrial equipment.
• Remote Job Sites: This is a relatively heavier type of design as compared to many of the other designs being used and is, therefore, appropriate where the structure is only required for a while or where the office is located far from the business district.
• Agricultural Uses: Direct support of agricultural air tools and air maintenance requirements of farms.