Variable-Speed Air Compressor​

This equipment works at a pressure of.8MPa /116psi, FAD 1.1 m³/min the constant supply of pressure and air in compressed form. This is provided by the 230-litre air receiver that enhances adequate air storage and minimizes the rate of compressor operation. This model has a noise level of not more than 62dB which makes the fan appropriate for use indoors when quiet is desired.

• Variable Speed Control: Frequency conversion start provides the compressor with motor speed regulation by the actual air requirements, increasing efficiency and minimizing energy consumption.
• High Efficiency: A 7.5 kW (10 HP) motor is standard in our equipment, it is highly effective and trustworthy for a multitude of industry operations.
• Compact Design: The compressor occupies an area of 1250 mm x 600 mm x 1380 mm, and therefore taking as little space as it is possible, this model can be installed in shops or other small industrial premises.
• Low Noise Operation: With a noise production level of ≤62dB it is a silent device and can therefore be used where noise is not desirable.
• Large Air Receiver: The 230-liter air receiver is used for storing the compressed air which is sufficient and hence minimizes the operational downtime.

• Variable Speed Motor (10 HP / 7.5 kW): Continuously varies speed in response to air demand so that energy is conserved for as long as possible, and the lure of the compressor is consumed at a very slow rate.
• Single-Stage Compression System: In operation, the compression mechanism employed is straightforward but highly efficient in reducing wear and enhancing operational durability.
• 230-Liter Air Receiver: Enough air storage so that the supply of air would be continuous rather than there being frequent cycles through the compressor.

• Installation: Mount the compressor in an appropriately aired place so that it will not overheat due to the trapped heat from its working process. Design some space that can be used for general maintenance and inspections in the facility.
• Routine Maintenance: Some elements to monitor during operation include the air filter, lubrication system, and pressure setting so as not to wear out quickly. Search for cracks and appear for any strange sound.
• Power Supply Compatibility: Make sure to supply the proper voltage for the device (which is 380V/50Hz or 220V) but Voltage can be customized according to region.

• Workshops and Factories: Designed for use in small to medium workshops/factories for use in powering pneumatic tools, machinery, and allied equipment.
• Automotive Service Centers: Recommended for use where compressed air is needed for air activities such as blowing tires, and using air chisels, and air hammers.
• HVAC Systems: Can be installed within HVAC systems designed for the proper handling of the air in commercial or industrial buildings.
• Laboratories and Research Facilities: This compressor is specially designed for laboratories or research stations thus the low noise and accurate regulation of airflow.